FBT CLA 206A

FBT Vertus CLA 206A Active Speaker 2-way Active Line Array Column - 600Wrms+300Wrms
FBT CLA206A je Class-D 600W + 300W sustav koji isporučuje maksimalni SPL od 133 dB zahvaljujući 2x 6,5' wooferima i 1,4' 
B&C HF kompresijskom pogonu. Ugrađeni DSP nudi izbor od osam unaprijed postavljenih postavki. Kompaktni stup se može koristiti samostalno ili u klasterima, ili kao idealna nadopuna za CLA406.2A, tvoreći cjelokupni sustav s povećanom srednje-visokom disperzijom i dosljednom ujednačenošću zvučnog tlaka u području slušanja. Kućište od brezove šperploče debljine 12 mm (0,5 inča) otporno na ogrebotine, dvije bočne ručke, gumenim umetcima za zaštitu i protukliznim gornjim i donjim  dijelom, 4 bočna umetka, dvije gornje i dvije donje točke dizajnirane za prihvaćanje klinova za brzo otpuštanje ili vijaka M10. Gornja strana nagnuta za 20 stupnjeva kako bi se postigla maksimalna fleksibilnost upotrebe u kombinaciji s drugim CLA 206A ili CLA 406A kako bi se vertikalni kut disperzije sustava prilagodio području slušanja. Više detalja u nastavku.

Specifikacija FBT Vertus CLA206A aktivna zvučna kutija:
Bi-amplified 2-way line array
2 x 165mm (6.5 inch) custom woofers with 38mm (1.5 inch) coil
Neodymium B&C compression HF driver with 36mm (1.4 inch) throat and 64mm (2.5 inch) coil
Large format FBT waveguide with 100 H x 25 degree V dispersion
Frequency response from 65Hz to 20KHz
Class-D 600Wrms for LF and 300Wrms for HF amplifiers with switching mode power supply
DSP processor with 8 equalisation presets
Control panel with XLR input and link, volume, presets, filter-HP, ground-lift
Neutrik PowerCON IN and LINK power connectors
Cabinet in 12mm (0.5 inch) birch plywood with scratch-resistant varnish, two side handles, rubber inserts for protection and anti-slip upper and lower
4 lateral inserts, two upper and two lower points designed to accept quick release pins or M10 screws. New hardware for flying installations, for ground setups and the possibility of coupling two or more CLA 406A / CLA 206A with an angle of 0 - 20 degree in 5 degree steps vertically, all with optional quick release pins for touring.
35mm stand socket
Top side inclined 20 degree to have maximum flexibility of use in combination with other CLA 206A or CLA 406A in order to adapt the vertical dispersion angle of the system to the listening area.
The system can be used both in small point source systems with the CLA 118SA sub and in clusters of two to have a dispersion of 40 degree (V). It can also be considered a down-fill for CLA 406A systems.

BUILT-IN AMPLIFIER LF/HF:
600/300 W RMS
BUILT-IN AMPLIFIER PEAK LF/HF:
1200/600 W
FREQUENCY RESPONSE:
65Hz-20kHz -6dB
LOW FREQUENCY WOOFER:
2x6.5 - 1.5 coil inch
HIGH FREQUENCY DRIVER:
1x1.4 - 2.5 coil - neodymium inch
MAXIMUM SPL CONT/PEAK:
133 dB
DISPERSION:
100°x25° H x V
INPUT IMPEDANCE:
22 Kohm
CROSSOVER FREQUENCY:
1.2 KHz
AC POWER REQUIREMENTS:
640 VA
INPUT CONNECTOR:
XLR with loop
POWER CORD:
5 mm
NET DIMENSION (WXHXD):
190x777x290 mm
NET WEIGHT:
20 kg
TRANSPORT DIMENSION (WXHXD):
315x862x420 mm
TRANSPORT WEIGHT:
22kg